For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
Quick answer: Under EN ISO 20345:2022 (including amendment A1:2024), both S3 and S7 safety footwear provide toe protection and penetration resistance. The key difference is WR — water resistance of the whole footwear. S3 requires WPA (water penetration and absorption performance of the upper), while S7 combines S3 requirements with whole-footwear WR testing.
For European PPE importers, distributors and private-label brands, the distinction affects product specification, testing documentation and the environments for which a footwear range is intended. It also matters when comparing S3S with S7S, or S3L with S7L.
An S3-family safety shoe is designed for a combination of mechanical hazards and exposure to moisture at the upper. Under EN ISO 20345:2022, the S3 category includes:
Important: WPA concerns the upper; it is not the same as passing a whole-footwear WR test. The marking WRU belongs to the earlier terminology and was replaced by WPA in the 2022 revision. The basic S3 classification does not by itself establish whole-footwear water resistance.
S7 builds on S3 by adding WR, meaning that the complete footwear must meet the standard's water-resistance test requirements. This is especially relevant to outdoor safety boots and footwear intended for recurring wet conditions.
An S7 or S7S water-resistant safety boot may use a waterproof membrane or another appropriate construction, but the material description alone is not proof of compliance. Buyers should verify the tested model and its certification documents.
The table compares the base S3 and S7 classifications under EN ISO 20345:2022. Additional markings must be assessed separately.
| Requirement | S3 | S7 |
|---|---|---|
| 200 J toe protection | Required | Required |
| Antistatic (A) and heel energy absorption (E) | Required | Required |
| Upper water penetration and absorption (WPA) | Required | Required |
| Penetration resistance and cleated outsole | Required | Required |
| Whole-footwear water resistance (WR) | Not required by S3 category | Required |
| Fuel-oil-resistant outsole (FO) | Optional additional marking | Optional additional marking |
EN ISO 20345:2022 distinguishes penetration-resistant inserts more precisely. This is an important purchasing detail, not simply a different way of writing the same class.
Put simply, S7L corresponds to S3L plus WR, and S7S corresponds to S3S plus WR. Do not describe an S7S model as plain S7 if the distinction matters for a buyer's specification or product documentation.
For a footwear importer or distributor, choosing a category starts with the actual working environment rather than the highest category number:
For private-label programs, the water-resistant construction must also work with the desired upper design, outsole method, fit, weight and price position. More information is available in our OEM and ODM footwear development capabilities and quality and certification management pages.
No. S3 requires WPA performance of the upper, but whole-footwear WR is not a mandatory part of the S3 classification. Buyers should check the complete marking and documentation rather than assume all S3 footwear is waterproof.
Not necessarily. S7 adds a relevant property for wet environments, but the right footwear category depends on workplace hazards, comfort requirements, construction, cost and the intended application.
No. FO and SR are additional markings under the 2022 framework. Look for the specific marking and supporting documentation for the model being sourced.
The defining difference between S3 and S7 is whole-footwear water resistance (WR). The choice between S3/S3L/S3S and S7/S7L/S7S should then reflect the required penetration-resistant insert, exposure conditions and confirmed certification scope.
For examples of available constructions, explore our S7S ankle safety boots, or S3S safety footwear. Confirm the details of any individual model before specifying it for a program.
Xiamen Workway Protection Technology Co., Ltd. (WORKWAY) supports B2B buyers with safety footwear product development, manufacturing coordination, testing support and multi-style OEM/ODM programs for European and global markets.
Discuss Your Safety Footwear ProjectTechnical references: ISO 20345 standard information; uvex EN ISO 20345:2022 safety footwear guide. The standard and model-specific compliance documentation take precedence over this explanatory article.
1504, Building B, Taidi Haixi Center, Hai Cang District, Xiamen, 361026, China.
Jack
Tel: +86-592-6511408
Email: info@workwaysafety.comFor inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.



